[OpenIndiana-discuss] Network configuration in zones

[Stephan Wild]

Hi Lou,

Thank you for your answer. I use a physical NIC no VNIC. If I understand you in the right way, I have to 
dladm create-vnic -l e1000g1 vnic1
And then use vnic1 in the zone. 

But what is CrossBow?

Thanks a lot

Stephan Wild

> Am 12.05.2021 um 17:58 schrieb Lou Picciano <LouPicciano at comcast.net>:
> 
> First, welcome to OI. Happy to have you here!
> 
> (Can’t tell from your post; you may have done it already, but) Sounds like you need to setup a Virtual NIC, on top of CrossBow. My own setup prefers an in-kernel ’switch’; a virtual subnet, essentially. My NGZs then speak to that*.
> 
> Our own docs may have some background. Meanwhile, here’s the Oracle version: https://docs.oracle.com/cd/E93612_01/html/E93617/s11networking.html
> 
> Lou Picciano
> 
> *Though I must admit we’re having some trouble with this at the moment, secondary to recent updates. Will address shortly.
> 
> 
>> On May 12, 2021, at 11:50 AM, Stephan Wild <stephan-wild at web.de> wrote:
>> 
>> Hey there,
>> I just started with OpenIndiana an have a problem:
>> I created a pool and a ZFS, after that I created a zone with exclusive IP mode with a physical NIC e1000g1. Then I installed the zone did my network config in the zone with DHCP, and I can perform package Installation and provide service to the world. But when I reboot the global Zone, then I am not able to boot the new created zone, because the NIC is used by the global zone. 
>> Do you have any idea why the NIC is pushed to the GZ?
>> 
>> Thanks in advice
>> 
>> Stephan 
>> 
>> _______________________________________________
>> openindiana-discuss mailing list
>> openindiana-discuss at openindiana.org
>> https://openindiana.org/mailman/listinfo/openindiana-discuss
> 
> 
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss