[OpenIndiana-discuss] Writing cdrom with Brasero fails everytime but works with cdrecord

[russell]

Hi

Due to some exceptional circumstances I had to write four cdroms for 
some server upgrades as they do not remote management licenses.
After inserting a blank cdrom into my dvd drive, started Brasero and 
burn the iso image to the cdrom, it reported success but only offered 
cancel and eventually complained of an error which left the dvd drive 
unusable until the computer was restarted. Checking the cdrom I found it 
blank.

I repeated burning the image but using cdrecord and it worked first 
time, after completing the remaining cdroms with cdrecord I tried again 
with Brasero and it had the exact same issues.


Dec  6 13:57:38 tesla sata: [ID 801593 kern.warning] WARNING: 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1062 at 0,1:
Dec  6 13:57:38 tesla  SATA device at port 4 - device failed
Dec  6 13:57:38 tesla scsi: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1062 at 0,1/cdrom at 4,0 (sd2):
Dec  6 13:57:38 tesla   Command failed to complete...Device is gone

  Dec  6 14:08:28 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1062 at 0,1/disk at 3,0 (sd34) online
Dec  6 14:08:28 tesla sata: [ID 663010 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1062 at 0,1 :
Dec  6 14:08:28 tesla sata: [ID 761595 kern.info]       SATA CD/DVD 
(ATAPI) device at port 4
Dec  6 14:08:28 tesla sata: [ID 846691 kern.info]       model TSSTcorp 
CDDVDW SH-222AL
Dec  6 14:08:28 tesla sata: [ID 693010 kern.info]       firmware SB00
Dec  6 14:08:28 tesla sata: [ID 163988 kern.info]       serial number 
R8JW8FBB12347
Dec  6 14:08:28 tesla sata: [ID 594940 kern.info] supported features:
Dec  6 14:08:28 tesla sata: [ID 981177 kern.info]        DMA
Dec  6 14:08:28 tesla sata: [ID 514995 kern.info]       SATA Gen1 
signaling speed (1.5Gbps)

Dec  6 14:48:48 tesla ahci: [ID 517647 kern.warning] WARNING: ahci0: 
watchdog port 4 satapkt 0xfffffe5998831b88 timed out
Dec  6 14:49:48 tesla ahci: [ID 517647 kern.warning] WARNING: ahci0: 
watchdog port 4 satapkt 0xfffffe599d422048 timed out
Dec  6 14:49:48 tesla sata: [ID 801593 kern.warning] WARNING: 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1062 at 0,1:
Dec  6 14:49:48 tesla  SATA device at port 4 - device failed
Dec  6 14:49:48 tesla scsi: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1062 at 0,1/cdrom at 4,0 (sd2):
Dec  6 14:49:48 tesla   Command failed to complete...Device is gone

Any one else had issues with Brasero?

TIA

Russell