[OpenIndiana-discuss] Fwd: Add inotify support to illumos-gate

[Udo Grabowski (IMK)]

On 08/05/2023 20:59, Andreas Wacknitz wrote:
> Am 08.05.23 um 16:10 schrieb Udo Grabowski (IMK):
>> On 08/05/2023 11:13, Udo Grabowski (IMK) wrote:
>>>,,,
>>
>> And still, even with LD_LIBRARY_PATH set to gcc 10, libgtkmm-3 again
>> loads itself libstdc++.so.6 from gcc 7 AND 10, as well as libgcc_s.so.1
>> from gcc 7 AND 10.
>>
>> And the same problem for libgdkmm-3, and libpangomm-1.4. Probably because
>> software that is still compiled with gcc 7 depends on them.
>>
>> This mixup should be cleared first.
>>
>> All libraries loaded from mate-system-monitor that depend on gcc:
>>
>> ############ /usr/lib/64/libgtkmm-3.0.so.1 ###############
>>         libstdc++.so.6 => /usr/gcc/7/lib/amd64/libstdc++.so.6
>>         libgcc_s.so.1 => /usr/gcc/7/lib/amd64/libgcc_s.so.1
>>         libstdc++.so.6 => /usr/gcc/10/lib/amd64/libstdc++.so.6
>>         libgcc_s.so.1 => /usr/gcc/10/lib/amd64/libgcc_s.so.1
 >>
>> ############ /usr/lib/64/libgdkmm-3.0.so.1 ###############
>>         libstdc++.so.6 => /usr/gcc/7/lib/amd64/libstdc++.so.6
>>         libgcc_s.so.1 => /usr/gcc/7/lib/amd64/libgcc_s.so.1
>>         libstdc++.so.6 => /usr/gcc/10/lib/amd64/libstdc++.so.6
>>         libgcc_s.so.1 => /usr/gcc/10/lib/amd64/libgcc_s.so.1
>> ...
>> ############ /usr/lib/64/libpangomm-1.4.so.1 ###############
>>         libstdc++.so.6 => /usr/gcc/7/lib/amd64/libstdc++.so.6
>>         libgcc_s.so.1 => /usr/gcc/7/lib/amd64/libgcc_s.so.1
>>         libstdc++.so.6 => /usr/gcc/10/lib/amd64/libstdc++.so.6
>>         libgcc_s.so.1 => /usr/gcc/10/lib/amd64/libgcc_s.so.1
 >> ...
>>
>>
>>
>> _______________________________________________
>> openindiana-discuss mailing list
>> openindiana-discuss at openindiana.org
>> https://openindiana.org/mailman/listinfo/openindiana-discuss
> I have upgraded pangomm and rebuilt its dependend packages gtkmm, gtkmm3
> and gparted.
> So all are using the correct libraries now.

libgdkmm-3.0 is also in the list and should be corrected as well.
Unfortunately, my Dell T3500 (where I installed the rolling Hipster)
doesn't boot anymore after update from today (serial 21623) and
I'm unfortunately in HOME-Office...), so I can't check anything
today.