[OpenIndiana-discuss] zpool status rpool not consistent with diskinfo
Stephan Althaus
Stephan.Althaus at Duedinghausen.eu
Wed Sep 20 11:14:29 UTC 2023
Hello!
I swapped 2 of 3 root-pool drives (after power off)
to different controllers, (with power-off-saving battery pack)
and now the device names are inconsistent - the device names in the pool
context have not been not updated.
Boot message was shown: "NOTICE: Performing full ZFS device scan!"
Messages regarding the move where also in the logs:
messages:923126:Sep 20 09:24:21 oi genunix: [ID 176336 kern.notice]
devid register: devid for
/pci at 0,0/pci8086,c05 at 1,1/pci1028,1f1c at 0/iport at 20/disk at p5,0 does not
match. stored:
id1,sd at TATA_____Patriot_P220_1TB________________________P220HBCB230710002657,
new:
id1,sd at TATA_____EMTEC_X150_480GB________________________511200729140001240__.
messages:923339:Sep 20 09:24:32 oi zfs: [ID 101897 kern.notice] NOTICE:
vdev_disk_open /dev/dsk/c3t2d0s0: update devid from
'id1,sd at SATA_____EMTEC_X150_480GB__511200729140001240/a' to
'id1,sd at TATA_____EMTEC_X150_480GB________________________511200729140001240__/a'
... but not for the "SCSI" ones (sata disks on SAS controller LSIxxxx
JOBD, driver mpt_sas i believe)
Pool status is ok.
Is there a command to update this info?
Reboot did not change the drive info.
Importing/exporting the rpool via OI-USB-live-boot-stick would help, do
i really have to do so ?
# diskinfo
TYPE DISK VID PID SIZE RMV SSD
SCSI c7t5d0 EMTEC X150 480GB 447.13 GiB
no yes
SCSI c8t4d0 Patriot P220 1TB 953.87 GiB
no yes
SATA c3t3d0 EMTEC X150 480GB 447.13 GiB
no yes
$ zpool status
pool: rpool1
state: ONLINE
scan: resilvered 381G in 0 days 00:51:40 with 0 errors on Tue Sep 12
16:36:55 2023
config:
NAME STATE READ WRITE CKSUM
rpool1 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
c3t2d0s0 ONLINE 0 0 0
c3t3d0s0 ONLINE 0 0 0
c7t5d0s0 ONLINE 0 0 0
Regards,
Stephan
More information about the openindiana-discuss
mailing list