[OpenIndiana-discuss] zpool status rpool not consistent with diskinfo

Toomas Soome tsoome at me.com
Wed Sep 20 11:59:51 UTC 2023


You can try 'zpool reopen’, if that will not help, remove /etc/zfs/zpool.cache. There is some issue that information in zpool.cache is not updated…

rgds,
toomas

> On 20. Sep 2023, at 14:14, Stephan Althaus <Stephan.Althaus at Duedinghausen.eu> wrote:
> 
> Hello!
> 
> I swapped 2 of 3 root-pool drives (after power off)
> to different controllers, (with power-off-saving battery pack)
> and now the device names are inconsistent - the device names in the pool context have not been not updated.
> 
> Boot message was shown: "NOTICE: Performing full ZFS device scan!"
> 
> Messages regarding the move where also in the logs:
> 
> messages:923126:Sep 20 09:24:21 oi genunix: [ID 176336 kern.notice] devid register: devid for /pci at 0,0/pci8086,c05 at 1,1/pci1028,1f1c at 0/iport at 20/disk at p5,0 does not match. stored: id1,sd at TATA_____Patriot_P220_1TB________________________P220HBCB230710002657, new: id1,sd at TATA_____EMTEC_X150_480GB________________________511200729140001240__.
> messages:923339:Sep 20 09:24:32 oi zfs: [ID 101897 kern.notice] NOTICE: vdev_disk_open /dev/dsk/c3t2d0s0: update devid from 'id1,sd at SATA_____EMTEC_X150_480GB__511200729140001240/a' to 'id1,sd at TATA_____EMTEC_X150_480GB________________________511200729140001240__/a'
> 
> ... but not for the "SCSI" ones (sata disks on SAS controller LSIxxxx JOBD, driver mpt_sas i believe)
> 
> Pool status is ok.
> 
> Is there a command to update this info?
> 
> Reboot did not change the drive info.
> 
> Importing/exporting the rpool via OI-USB-live-boot-stick would help, do i really have to do so ?
> 
> 
> # diskinfo
> TYPE    DISK                    VID      PID SIZE          RMV SSD
> SCSI    c7t5d0                  EMTEC    X150 480GB        447.13 GiB   no  yes
> SCSI    c8t4d0                  Patriot  P220 1TB          953.87 GiB   no  yes
> SATA    c3t3d0                  EMTEC    X150 480GB        447.13 GiB   no  yes
> 
> $ zpool status
>   pool: rpool1
>  state: ONLINE
>   scan: resilvered 381G in 0 days 00:51:40 with 0 errors on Tue Sep 12 16:36:55 2023
> config:
> 
>         NAME          STATE     READ WRITE CKSUM
>         rpool1        ONLINE       0     0     0
>           mirror-0    ONLINE       0     0     0
>             c3t2d0s0  ONLINE       0     0     0
>             c3t3d0s0  ONLINE       0     0     0
>             c7t5d0s0  ONLINE       0     0     0
> 
> 
> Regards,
> 
> Stephan
> 
> 
> 
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss



More information about the openindiana-discuss mailing list