[OpenIndiana-discuss] Gimp 3: hang in place my station

[Bob Friesenhahn]

It should be 'identify'.

Regardless, it seems most likely that you have hardware issues and should
run a memory tester and any other hardware tests available. It is useful to
provoke the issue in some other way.

LCMS (LittleCMS) may now use assembly code, or advanced instructions while
using a color profile. If Illumos has a sensitivity to this, then that
could be a cause. This would be a very unusual problem (and a security
issue).

Bob

On Wed, Aug 20, 2025, 7:11 PM dan via openindiana-discuss <
openindiana-discuss at openindiana.org> wrote:

>
> Bob, I tried installing imagemagick (that is neither required by Gimp) but
> I didn't get
> the command you suggest, identity.
>
> Dan
> 5mode
>
> Aug 21, 2025 01:48:14 Dan via openindiana-discuss <
> openindiana-discuss at openindiana.org>:
>
> >
> > This an other image that hangs Gimp, the same:
> > https://gaox.io/l/dc211ff
> >
> > Both images comes from the mobile Vivo of mine (bought in
> > China), its camera.
> > About both images Gimp reports an RGB profile copyrighted
> > one by Google and other by Apple Inc, eheheh.....like it is guessing
> > *the bad*. I doubt it is guessing for true, this is the matter.
> >
> > I just tried an other image of mine, a jpg of 3mb, not requiring any
> > RGB profile conversion and everthing go smoothly, I can work over it
> > like a charm.
> >
> > I have no ECC memory and on this machine RAM amounts to 10gb.
> > It is using the shared memoery going through the Intel cpu.
> > The bios of this boy is fully customizable, but I already changed any
> > settings including the overclock settings, nothing change.
> >
> > Gimp is version 3.0.4
> >
> >
> > Dan
> > 5mode
> >
> >
> >
> > Bob Friesenhahn <graphicsmagick.project at gmail.com> wrote:
> >
> >> Does your machine have ECC memory? How much RAM memory does it have?
> >>
> >> What does
> >>
> >> identity file
> >>
> >> or
> >>
> >> gm identify file
> >>
> >> (ImageMagick or GraphicsMagick)
> >>
> >> say?
> >>
> >> What version is (or how old) is the GIMP release?
> >>
> >> Bob
> >>
> >>
> >> On Wed, Aug 20, 2025, 6:16 PM Dan via openindiana-discuss <
> >> openindiana-discuss at openindiana.org> wrote:
> >>
> >>>
> >>> Hello,
> >>>
> >>> Opening the following image in Gimp following the suggested
> >>> conversion hangs my machine just pressing the convert button:
> >>> http://gaox.io/l/96ab0e6
> >>>
> >>> This the screen of Gimp instead:
> >>> http://gaox.io/l/bbbf76c
> >>>
> >>> The station hang boot screen immediately.
> >>>
> >>> I can be more verbous (-v), let me try other operations over Gimp..
> >>>
> >>> thx
> >>>
> >>> Dan
> >>> 5mode
> >>>
> >>> _______________________________________________
> >>> openindiana-discuss mailing list
> >>> openindiana-discuss at openindiana.org
> >>> https://openindiana.org/mailman/listinfo/openindiana-discuss
> >>>
> >> _______________________________________________
> >> openindiana-discuss mailing list
> >> openindiana-discuss at openindiana.org
> >> https://openindiana.org/mailman/listinfo/openindiana-discuss
> >
> >
> > _______________________________________________
> > openindiana-discuss mailing list
> > openindiana-discuss at openindiana.org
> > https://openindiana.org/mailman/listinfo/openindiana-discuss
>
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss
>