[OpenIndiana-discuss] usb stability

[russell]

Good Morning

I have a USB drive Sandisk Ultra USB 3.0 64GB which mounts correctly 
when plugged into a USB 2.0 port, unmounted the drive and unplugged then 
plugged into USB3.0 port which failed to mount the drive, after waiting a

couple of minutes I plugged the drive into the same USB 3.0 port and it 
did mount.

Jan 24 07:14:46 tesla usba: [ID 912658 kern.info] USB 2.10 device 
(usb781,5581) operating at hi speed (USB 2.x) on USB 2.0 external hub: 
storage at 4, scsa2usb0 at bus address 7
Jan 24 07:14:46 tesla usba: [ID 349649 kern.info]  USB  SanDisk 3.2Gen1 
0401b2f371b481650e18cefc9ac01206935a1f770a880e0db03b2e1ffdc0828ddd5e000000000000000000005842be55009e6918815581073bb00804
Jan 24 07:14:46 tesla genunix: [ID 936769 kern.info] scsa2usb0 is 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 4
Jan 24 07:14:46 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 4 (scsa2usb0) online
Jan 24 07:14:46 tesla scsi: [ID 583861 kern.info] sd10 at scsa2usb0: 
target 0 lun 0
Jan 24 07:14:46 tesla genunix: [ID 936769 kern.info] sd10 is 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 4/disk at 0,0
Jan 24 07:14:46 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 4/disk at 0,0 (sd10) 
online
Jan 24 07:15:06 tesla scsi: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 4/disk at 0,0 (sd10):
Jan 24 07:15:06 tesla   Command failed to complete...Device is gone
Jan 24 07:15:09 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 4/disk at 0,0 (sd10) 
removed
Jan 24 07:15:09 tesla last message repeated 1 time
Jan 24 07:15:09 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 4 (scsa2usb0) removed
Jan 24 07:15:17 tesla usba: [ID 912658 kern.info] USB 3.20 device 
(usb781,5581) operating at super speed (USB 3.x) on USB 3.1 root hub: 
storage at 3, scsa2usb15 at bus address 7
Jan 24 07:15:17 tesla usba: [ID 349649 kern.info]  USB  SanDisk 3.2Gen1 
0401b2f371b481650e18cefc9ac01206935a1f770a880e0db03b2e1ffdc0828ddd5e000000000000000000005842be55009e6918815581073bb00804
Jan 24 07:15:17 tesla genunix: [ID 936769 kern.info] scsa2usb15 is 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3
Jan 24 07:15:17 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3 (scsa2usb15) online
Jan 24 07:15:17 tesla scsi: [ID 583861 kern.info] sd60 at scsa2usb15: 
target 0 lun 0
Jan 24 07:15:17 tesla genunix: [ID 936769 kern.info] sd60 is 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3/disk at 0,0
Jan 24 07:15:17 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3/disk at 0,0 (sd60) online
Jan 24 07:15:18 tesla usba: [ID 508659 kern.notice] NOTICE: driver 
scsa2usb attempting to open non-default of a USB 3.0 or newer device 
through usb_pipe_open(). scsa2usb must be updated to use 
usb_pipe_xopen() to work with USB device  USB  SanDisk 3.2Gen1.
Jan 24 07:15:18 tesla usba: [ID 691482 kern.warning] WARNING: 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3 (scsa2usb15): 
Reinserted device is accessible again.
Jan 24 07:15:18 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3 (scsa2usb15) online
Jan 24 07:15:18 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3/disk at 0,0 (sd60) online
Jan 24 07:15:20 tesla scsi: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3/disk at 0,0 (sd60):
Jan 24 07:15:20 tesla   Command failed to complete...Device is gone
Jan 24 07:15:35 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3/disk at 0,0 (sd60) removed
Jan 24 07:15:35 tesla last message repeated 1 time
Jan 24 07:15:35 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 3 (scsa2usb15) removed
Jan 24 07:17:30 tesla usba: [ID 691482 kern.warning] WARNING: 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0 (xhci0): Connecting device on 
port 7 failed
Jan 24 07:17:31 tesla last message repeated 1 time
Jan 24 07:19:49 tesla usba: [ID 912658 kern.info] USB 2.10 device 
(usb781,5581) operating at hi speed (USB 2.x) on USB 3.1 root hub: 
storage at 7, scsa2usb8 at bus address 7
Jan 24 07:19:49 tesla usba: [ID 349649 kern.info]  USB  SanDisk 3.2Gen1 
0401b2f371b481650e18cefc9ac01206935a1f770a880e0db03b2e1ffdc0828ddd5e000000000000000000005842be55009e6918815581073bb00804
Jan 24 07:19:49 tesla genunix: [ID 936769 kern.info] scsa2usb8 is 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 7
Jan 24 07:19:49 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 7 (scsa2usb8) online
Jan 24 07:19:49 tesla scsi: [ID 583861 kern.info] sd25 at scsa2usb8: 
target 0 lun 0
Jan 24 07:19:49 tesla genunix: [ID 936769 kern.info] sd25 is 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 7/disk at 0,0
Jan 24 07:19:49 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/storage at 7/disk at 0,0 (sd25) online

Kind Regards

Russell


On 2025-01-22 17:55, Stephan Althaus wrote:
> On 1/22/25 15:15, russell wrote:
>>
>> Hi Stephan
>>
>> I have USB 3 and USB 2 ports, USB drives have been reliable on both 
>> USB 2 and 3 but not always.
>> Digital cameras have only worked on USB 2 ports and then it depends 
>> on the BE.
>> When I experience a problem with USB after creating a new BE, I can 
>> usually revert to an earlier BE to access the device.
>>
>> Kind Regards
>>
>> Russell
>>
> Hi Russel!
>
> We really need more technical details on what is happening, concrete  
> error messages and logs and such..
>
> Regards,
> Stephan
>
>