[OpenIndiana-discuss] Sharing zfs volume on QLogic QLE4062C

[Gabriele Bulfon]

Thanx for the pointer. I did all of this already, and I'm not talking about serving iscsi
over ethernet via the OS, but letting the QLogic card implement the iscsi through its
ready to run hardware.
What I miss is how to bind the QLogic hardware iscsi targets to ZFS volumes.
If QLogic gives me a specific driver for Solaris, and it works, and I can use its tools
to configure iscsi on the OS, I believe there should be a reason for it.
I'm missing something, I think....
----------------------------------------------------------------------------------
Da: Jonathan Adams
A: Discussion list for OpenIndiana
Data: 19 maggio 2011 21.12.44 CEST
Oggetto: Re: [OpenIndiana-discuss] Sharing zfs volume on QLogic QLE4062C
have you seen:
http://serverfault.com/questions/264560/openindiana-zfs-with-shareiscsi-property-missing
On 19 May 2011 16:50, Gabriele Bulfon
wrote:
Hi, I was trying to follow some guides to share zfs volumse through hardware manged iscsi.
I have installed an QLE4062C and original QLogic drivers.
The system see the device and ports, QLogic cli commands can see everything correctly.
I'm trapped now, because "fcinfo hba-port" does not see any adapter.
Docs talk about switching from initiator mode to traget, by updating the driver from qlc to qlt.
My driver is not qlc, but qla4xxx, or what am I missing?
I tried to do the update_drv changing from qla4xxx to qlt, but it doesn't work and it fails to attach.
How can I let OpenIndiana use the card and share zfs volumes on it?
Thanks for any help.
Gabriele.
_______________________________________________
OpenIndiana-discuss mailing list
OpenIndiana-discuss at openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
OpenIndiana-discuss mailing list
OpenIndiana-discuss at openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss