[OpenIndiana-discuss] Sharing zfs volume on QLogic QLE4062C

[Gary Driggs]

Below is some helpful text edited from the napp-it UI's verbiage. This helped me figure out what needs done under COMSTAR as well as what steps to take under NetApp's ONTAP 8.0.1. The concepts are the same for any system being configured as a target...

1. You must define a logical unit 
2. You must define a target
3. You must define a target group and add your target(s) as a member (views cannot set to targets but target groups only)
4. You must set a view for each logical unit to a target group (or set to all). After this, all target members will show this logical unit.

I found this article helpful for COMSTAR specifics; http://www.tek-blog.com/main/index.php?blog=2&title=comstar_howto

-Gary