[OpenIndiana-discuss] Reboot failed after Hipster upgrade

[Gary Mills]

On Thu, Aug 10, 2017 at 05:12:58PM -0500, Gary Mills wrote:
> On Thu, Aug 10, 2017 at 08:35:38AM +0200, Till Wegmüller wrote:
> > 
> > Try adding "-v" at the end of the boot line
> > that adds additional boot startup messages.
> 
> Well, I got a lot of information from the device probe.  Some messages
> scrolled off the screen.
> 
> After that it said:
> 
> /pci at 0,0/pci1043,81c0 at e :
> 	SATA disk device at port 0
> 	Model ST3169815AS
> 	firmware 4.AAB
> 	serial number		5RA60SZT
> 	supported features:
> 	  48-bit LBA, DMA, Native Command Queueing, SMART self-test
> 	SATA Gen1 signaling speed (1.5Gbps)
> 	Supported queue depth 32, limited to 1
> 	capacity = 312581808 sectors
> 
> The disk light showed some activity after that, but nothing more
> was printed on the console.

After a long pause, three more lines appeared:

    sd0 at nv_sata0: target 0 lun 0
    sd0 is /pci at 0,0/pci1043,81c0 at e/disk at 0,0
    /pci at 0,0/pci1043,81c0 at e/disk at 0,0 (sd0) online

There was nothing more after those.


-- 
-Gary Mills-		-refurb-		-Winnipeg, Manitoba, Canada-