[OpenIndiana-discuss] Hardware to run OpenIndiana ...

[Till Wegmüller]

Hi Jürgen.

I must admit I really seldomly reboot that system appart from the fma
errorlog it just runs.

Usually I use "init 5" to shutdown as this gets the best results.
Init 6 should help.

I have Set "acpi-user-options=2" in /boot/conf.d/acpi maybe that helps.
My guess is that acpi is Re-enabled during boot and thus the freeze.

Hope this helps
Till


On 22.04.2018 16:34, Jürgen Bereuter wrote:
> Hello,
> i try to install Hipster 2017.10 (usb) on an HP Proliant Microserver Gen 10.
> I know, that i had to disable uefi boot and use legacy bios, that works, so i am able to install it. And i have to disable acpi support (for installation and booting/running openindiana afterwards). But with this disabled option i am not able to reboot from command line (it freezes). 
> 
> Till, you wrote, that you have installed Openindiana on such a system. Is there a trick to solve my problems?
> Thanks! jürgen
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss
>