[OpenIndiana-discuss] Hardware to run OpenIndiana ...

[Jürgen Bereuter]

Till,
that was very helpful! The system is working and i am able to reboot (thats important, although i think, it could be a reboot after a kernel panic), and, also important to know, that these errors do not affect system integrity.

Thanks you for your fast response.
jürgen

> Am 22.04.2018 um 18:58 schrieb Till Wegmüller <toasterson at gmail.com>:
> 
> Hi Jürgen.
> 
> I must admit I really seldomly reboot that system appart from the fma
> errorlog it just runs.
> 
> Usually I use "init 5" to shutdown as this gets the best results.
> Init 6 should help.
> 
> I have Set "acpi-user-options=2" in /boot/conf.d/acpi maybe that helps.
> My guess is that acpi is Re-enabled during boot and thus the freeze.
> 
> Hope this helps
> Till
> 
> 
> On 22.04.2018 16:34, Jürgen Bereuter wrote:
>> Hello,
>> i try to install Hipster 2017.10 (usb) on an HP Proliant Microserver Gen 10.
>> I know, that i had to disable uefi boot and use legacy bios, that works, so i am able to install it. And i have to disable acpi support (for installation and booting/running openindiana afterwards). But with this disabled option i am not able to reboot from command line (it freezes). 
>> 
>> Till, you wrote, that you have installed Openindiana on such a system. Is there a trick to solve my problems?
>> Thanks! jürgen
>> _______________________________________________
>> openindiana-discuss mailing list
>> openindiana-discuss at openindiana.org
>> https://openindiana.org/mailman/listinfo/openindiana-discuss
>> 
> 
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss