[OpenIndiana-discuss] USB Access issues

Apostolos Syropoulos asyropoulos at yahoo.com
Sun Apr 25 18:33:18 UTC 2021


You can only mount the USB using

$ rmformat -l

to detect the USB and then (as root)

# mount -F pcfs /dev/dsk/c13t1d0p1:c  /mnt

to mount it. Here /dev/rdsk/c13t1d0p1 is the output from rmformat -l.
I have reported this problem last month.

Regards,
A.S.



----------------------
Apostolos Syropoulos
Xanthi, Greece









On Sunday, April 25, 2021, 9:14:39 PM GMT+3, russell <stream at willows7.myzen.co.uk> wrote: 





Good Afternoon

While usb devices are being being detected, I am unable to access the 
usb devices.

Apr 25 16:22:29 tesla usba: [ID 912658 kern.info] USB 2.0 device 
(usb781,5567) operating at hi speed (USB 2.x) on USB 2.0 external hub: 
storage at 3, scsa2usb1 at bus address 7
Apr 25 16:22:29 tesla usba: [ID 349649 kern.info] SanDisk Cruzer Blade 
4C530000140730116282
Apr 25 16:22:29 tesla genunix: [ID 936769 kern.info] scsa2usb1 is 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 3
Apr 25 16:22:29 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 3 (scsa2usb1) online
Apr 25 16:22:29 tesla scsi: [ID 583861 kern.info] sd11 at scsa2usb1: 
target 0 lun 0
Apr 25 16:22:29 tesla genunix: [ID 936769 kern.info] sd11 is 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 3/disk at 0,0
Apr 25 16:22:29 tesla genunix: [ID 408114 kern.info] 
/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 3/disk at 0,0 (sd11) 
online

Also when I try and access them from VirtualBox, the devices are recognised

Apr 25 16:41:11 tesla vboxusbmon: [ID 695880 kern.notice] Capturing USB 
Flash Disk 
0x90c:0x1000:/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage 
Bus=7 Port=3

However when I attempt to mount the USB drives the VM reports the following

00:00:44.560463 USBLibR3:Function (c0185685) failed. rc=VERR_NOT_FOUND
00:00:44.560492 USBLibR3:USBLibGetClientInfo VBOXUSBMON_IOCTL_CLIENTPATH 
failed! rc=VERR_NOT_FOUND
00:00:44.560509 USBProxy: Failed to get client info. rc=VERR_NOT_FOUND 
szDeviceIdent=0x90c:0x1000:4352:/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage
00:00:44.560524 usbProxyConstruct: Failed to open 
'0x90c:0x1000:4352:/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage', 
rc=VERR_OPEN_FAILED
00:00:44.560546 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) 
aIID={872da645-4a9b-1727-bee2-5585105b9eed} aComponent={ConsoleWrap} 
aText={Failed to create a proxy device for the USB device. (Error: 
VERR_OPEN_FAILED)}, preserve=false aResultDetail=-101

Checked the users are listed in correct vbox groups in /etc/group

TIA

Russelll


_______________________________________________
openindiana-discuss mailing list
openindiana-discuss at openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss



More information about the openindiana-discuss mailing list