[OpenIndiana-discuss] USB Access issues

[John D Groenveld]

In message <d10094d6-3896-ae0c-b05f-9739ea1ef534 at willows7.myzen.co.uk>, russell
 writes:
>While usb devices are being being detected, I am unable to access the 
>usb devices.
>
>Apr 25 16:22:29 tesla usba: [ID 912658 kern.info] USB 2.0 device 
>(usb781,5567) operating at hi speed (USB 2.x) on USB 2.0 external hub: 
>storage at 3, scsa2usb1 at bus address 7
>Apr 25 16:22:29 tesla usba: [ID 349649 kern.info] SanDisk Cruzer Blade 
>4C530000140730116282
>Apr 25 16:22:29 tesla genunix: [ID 936769 kern.info] scsa2usb1 is 
>/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 3
>Apr 25 16:22:29 tesla genunix: [ID 408114 kern.info] 
>/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 3 (scsa2usb1) online
>Apr 25 16:22:29 tesla scsi: [ID 583861 kern.info] sd11 at scsa2usb1: 
>target 0 lun 0
>Apr 25 16:22:29 tesla genunix: [ID 936769 kern.info] sd11 is 
>/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 3/disk at 0,0
>Apr 25 16:22:29 tesla genunix: [ID 408114 kern.info] 
>/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage at 3/disk at 0,0 (sd11) 
>online

Does it show up with format(1M) -e?
I think it will because sd(7D) has attached.

>Also when I try and access them from VirtualBox, the devices are recognised
>
>Apr 25 16:41:11 tesla vboxusbmon: [ID 695880 kern.notice] Capturing USB 
>Flash Disk 
>0x90c:0x1000:/pci at 0,0/pci1022,1483 at 1,2/pci1b21,1142 at 0/hub at 6/storage 
>Bus=7 Port=3
>
>However when I attempt to mount the USB drives the VM reports the following

# cfgadm -lv| grep -A1 SanDisk

My WAG is that USB passthru requires the device not to be configured
by the host.

John
groenveld at acm.org