[OpenIndiana-discuss] Rpool uncorrectable error

[Michelle]

root at jaguar:/var# iostat -En
c6d1             Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 
Model: KINGSTON SA400S Revision:  Serial No: 50026B73801BCEA 
Size: 120.03GB <120033607680 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 
Illegal Request: 0 
c4t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 
Vendor: ATA      Product: WDC WD60EFRX-68L Revision: 0A82 Serial No:
WD-WX21DA84EH0F 
Size: 6001.18GB <6001175126016 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 
Illegal Request: 0 Predictive Failure Analysis: 0 
c4t2d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 
Vendor: ATA      Product: WDC WD60EFRX-68L Revision: 0A82 Serial No:
WD-WX51DB880RJ4 
Size: 6001.18GB <6001175126016 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 
Illegal Request: 0 Predictive Failure Analysis: 0 
c4t3d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 
Vendor: ATA      Product: WDC WD60EFAX-68J Revision: 0A83 Serial No:
WD-WX22DC0AUC60 
Size: 6001.18GB <6001175126016 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 
Illegal Request: 0 Predictive Failure Analysis: 0 


Output from fmadm faulty only gives the error which happened when I
brought up the unit without the tank pool inserted... just in case.

That's as far as I know to go.

Michelle.


On Sun, 2021-08-29 at 12:56 +0100, Michelle wrote:
> I have the machine up and running and issued a zpool clear against
> rpool. At least as long as it lasts.
> 
> Reading things from ten years ago, I've disabled the microcode... it
> seems to be all I can do. I'm not expecting that to be the issue
> but...
> hey.
> 
> Nothing in /var/log/syslog which gives any clue. Last message was
> 23:05
> from sendmail, and then at 11:46 on a failure to gethostbyaddr after
> a
> reboot.
> 
> 
> 
> On Sun, 2021-08-29 at 12:31 +0100, Michelle wrote:
> > I'm sat here, not knowing quite what I'm dealing with.
> > 
> > OI recent build on HP N54L, as you may remember I hit a problem on
> > the
> > 8th August with rpool encountering an error on the SSD with the OS.
> > 
> > I replaced the drive and had the same thing straight away. Replaced
> > with another drive and took the unit down to basics including a RAM
> > check and rebuilt it. It's been running until today... same thing.
> > 
> > On the messages screen I see at just gone 00:00 this morning...
> > Sense Key: aborted command
> > Vendor Gen-ATA error code 0x3
> > Rpool has encountered an uncorrectable IO failure and has been
> > suspended. Zpool clear will be required before the pool can be
> > written
> > to
> > 
> > The rpool message repeated at 00:05, 00:22, 02:54 and at 08:54
> > ...and
> > it's now stopped responding.
> > 
> > So... I've now got no idea where to take this. On the face of it,
> > the
> > hardware is fine... on the face of it. However, there's something
> > wrong
> > here and given the history, I'm not sure where to start.
> > 
> > Part of me thinks I'm looking at hardware...
> > 
> > Power? Hmmm... why does the SSD fail instead of the spinning rust
> > drives?
> > 
> > Yet another hard drive? This is number three now, throwing
> > suspicion
> > at
> > other aspects.
> > 
> > I am reticent to just replace with another hard drive and carry on.
> > I
> > think it may not be to blame here.
> > 
> > Grateful for people's thoughts.
> > 
> > Michelle.
> > 
> > 
> > _______________________________________________
> > openindiana-discuss mailing list
> > openindiana-discuss at openindiana.org
> > https://openindiana.org/mailman/listinfo/openindiana-discuss