[OpenIndiana-discuss] weird network issue, choosing a default interface
Carl Brewer
carl at bl.echidna.id.au
Tue Dec 7 23:14:31 UTC 2021
G'day Tim,
On 8/12/2021 9:41 am, Tim Mooney via openindiana-discuss wrote:
> I have a dual-homed OI workstation with the 2nd NIC on a non-routeable
> private network too, and I have IPv6-specific routing issues every time
> the workstation is rebooted. My issues are (I think) coming because of
> OI's in.ndpd, the IPv6 Neighbor Discovery protocol daemon.
>
> Your issues are potentially easier, though.
>
> 1) are you running in.routed?
> 2) are you using nwam or statically-configured?
> 3) do you have anything in /etc/defaultrouter?
>
> What happens if you do
>
> sudo route -p delete -inet -dst default -gateway 203.6.241.1 -iface
> rge0
>
> Does that work? Does it change your current "netstat -rn" output?
I didn't do that, I had a look at the GUI network management stuff, and
fixed an errant subnet mask, and removed the default route from the rge0
interface. I don't think IPv6 is an issue, but it's working now :
netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ---------- ---------
default 203.6.241.1 UG 11 467289 e1000g0
127.0.0.1 127.0.0.1 UH 2 60106 lo0
192.168.2.0 192.168.2.4 U 4 317 rge0
203.6.241.0 203.6.241.37 U 5 9407656 e1000g0
Routing Table: IPv6
Destination/Mask Gateway Flags Ref Use
If
--------------------------- --------------------------- ----- ---
------- -----
::1 ::1 UH 2
328 lo0
fe80::/10 fe80::523e:aaff:fe0c:fcbf U 2
0 rge0
>
> Does it survive a reboot?
I haven't tried yet, but will do tonight when it won't disrupt my users
much.
Thanks!
Carl
More information about the openindiana-discuss
mailing list