[OpenIndiana-discuss] "format -e" segmentation fault attempting to label a 5 TB disk in Hipster 2017.10

Toomas Soome tsoome at me.com
Sun Feb 21 20:53:44 UTC 2021



> On 21. Feb 2021, at 22:50, Reginald Beardsley via openindiana-discuss <openindiana-discuss at openindiana.org> wrote:
> 
> WTF?
> 
> I  had loads of fun with this 4-5 years ago, but was able to put an EFI label on a 3 TB disk  and everything was fine when I moved the disk to my Solaris 10 instance where I have two in a mirror.
> 
> I'm trying to label a 5 TB disk so I can make a backup before attempting to fix grub on my Solaris 10 u8 system.
> 
> So I get this:
> 
> rhb at Hipster:/etc# zpool status
>  pool: epool
> state: ONLINE
>  scan: scrub repaired 0 in 2h30m with 0 errors on Wed Feb 17 17:39:53 2021
> config:
> 
>        NAME        STATE     READ WRITE CKSUM
>        epool       ONLINE       0     0     0
>          raidz1-0  ONLINE       0     0     0
>            c4d0s1  ONLINE       0     0     0
>            c6d1s1  ONLINE       0     0     0
>            c7d0s1  ONLINE       0     0     0
> 
> errors: No known data errors
> 
>  pool: rpool
> state: ONLINE
>  scan: scrub repaired 0 in 1h39m with 0 errors on Wed Feb 17 16:49:12 2021
> config:
> 
>        NAME        STATE     READ WRITE CKSUM
>        rpool       ONLINE       0     0     0
>          mirror-0  ONLINE       0     0     0
>            c4d0s0  ONLINE       0     0     0
>            c6d1s0  ONLINE       0     0     0
>            c7d0s0  ONLINE       0     0     0
> 
> errors: No known data errors
> rhb at Hipster:/etc# format -e
> Searching for disks...done
> 
> 
> AVAILABLE DISK SELECTIONS:
>       0. c4d0 <Unknown-Unknown-0001 cyl 60796 alt 2 hd 255 sec 252>
>          /pci at 0,0/pci-ide at 1f,2/ide at 1/cmdk at 0,0
>       1. c4d1 <drive type unknown>
>          /pci at 0,0/pci-ide at 1f,2/ide at 1/cmdk at 1,0
>       2. c6d1 <Unknown-Unknown-0001 cyl 60796 alt 2 hd 255 sec 252>
>          /pci at 0,0/pci-ide at 1f,2/ide at 0/cmdk at 1,0
>       3. c7d0 <Unknown-Unknown-0001 cyl 60796 alt 2 hd 255 sec 252>
>          /pci at 0,0/pci-ide at 1f,5/ide at 1/cmdk at 0,0
> Specify disk (enter its number): 1
> 
> Error: can't open disk '/dev/rdsk/c4d1p0'.
> Segmentation Fault
> 
> I was using OI because I knew that Solaris 10 u8 would dump core, but I *thought* this had been fixed in OI/Illumos.  All I want to do is put a UEFI label on it so I can use it with u8.
> 
> It boggles my mind that I would get a seg fault after all these years.  That was always my favorite bug fix because it was so easy. At least it is if you can recompile the code.  The overhead cost of being able to build OI is simply more than I am willing to pay.  I did get it to compile once *many* years ago, but I never got a response when I asked on the developer list how to test the new kernel.
> 
> But then again, I now find myself in a world where  it is proclaimed "racist" to insist that 2+2 = 4.
> 
> So time to take OI down and move the disk to Debian to label it.
> 
> Sigh..
> Reg


Hipster 2017 is 4 years old, please use current version. If it still is dumping core, please file issue/let us know.

rgds,
toomas


> 
> 
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss




More information about the openindiana-discuss mailing list