[OpenIndiana-discuss] recently trouble with USB devices

Fri May 21 09:48:38 UTC 2021

On 5/20/21 11:41 AM, Stephan Althaus wrote:
> On 5/20/21 11:18 AM, Udo Grabowski (IMK) wrote:
>> On 20.05.21 10:58, Stephan Althaus wrote:
>>> stop endpoint command (1)/slot (7) in wrong state: 19
>> This one ?
>> <https://github.com/joyent/smartos-live/issues/694>
>>
>> There's a workaround for the problem at the end of
>> the thread.
>>
>>
>> _______________________________________________
>> openindiana-discuss mailing list
>> openindiana-discuss at openindiana.org
>> https://openindiana.org/mailman/listinfo/openindiana-discuss
> Thats a nice thread giving commands to get closer, thanks for the hint!
>
> But i am plugging the device in after boot, detection of the device and
> and mounting the exfat partition is not the problem.
>
> I am hitting single failures while reading files with cp
> /media/sdcard/DCIM/101MSDCF/* ....
>
> "/media/sdcard/DCIM/101MSDCF/DS304430.ARW: I/O error"
> and dmesg shows some "error reading cluster 0x..."
>
>
> When i try once again one specific file
>
> cp /media/sdcard/DCIM/101MSDCF/DS304430.ARW
> ~/Documents/Pictures/Test/2021-05-20
>
> there is no error this time.
>
>
> Stephan
>
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss

Hi!

Just checked if the card reader works in a USB 2 port.
Here i get some errors while plugging in.

$ tail /var/adm/messages
May 21 10:53:34 dell6510 usba: [ID 912658 kern.info] USB 2.10 device
(usb56e,8007) operating at hi speed (USB 2.x) on USB 2.0 external hub:
storage at 2, scsa2usb26 at bus address 8
May 21 10:53:34 dell6510 usba: [ID 349649 kern.info] Realtek USB3.0 Card
Reader 201601060924
May 21 10:53:34 dell6510 genunix: [ID 936769 kern.info] scsa2usb26 is
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2
May 21 10:53:34 dell6510 genunix: [ID 408114 kern.info]
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2 (scsa2usb26) online
May 21 10:53:35 dell6510 scsi: [ID 583861 kern.info] sd41 at scsa2usb26:
target 0 lun 0
May 21 10:53:35 dell6510 genunix: [ID 936769 kern.info] sd41 is
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,0
May 21 10:53:35 dell6510 genunix: [ID 408114 kern.info]
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,0 (sd41) online
May 21 10:53:35 dell6510 scsi: [ID 583861 kern.info] sd53 at scsa2usb26:
target 0 lun 1
May 21 10:53:35 dell6510 genunix: [ID 936769 kern.info] sd53 is
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,1
May 21 10:53:35 dell6510 genunix: [ID 408114 kern.info]
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,1 (sd53) online

$ mdb -ke '::prtusb'
INDEX   DRIVER      INST  NODE          GEN  VID.PID    
PRODUCT            
1       xhci        2     pci1028,7b1   3.0  0000.0000   No Product String
2       hid         39    mouse         1.1  045e.0040   Microsoft
3-Button Mouse with IntelliEye(TM)
3       usb_mid     31    device        1.1  0bf8.100c   FSC KBPC PX
4       hubd        18    hub           2.0  413c.2513   No Product String
5       usb_mid     32    device        2.0  8087.0a2b   No Product String
6       hubd        19    hub           2.0  413c.2513   No Product String
7       usb_mid     33    device        1.1  0a5c.5832   5880
8       scsa2usb    26    storage       2.1  056e.8007   USB3.0 Card Reader

# diskinfo
<--no output, task seems to be waiting for something -->

$ tail -f /var/adm/messages
May 21 10:53:35 dell6510 scsi: [ID 583861 kern.info] sd41 at scsa2usb26:
target 0 lun 0
May 21 10:53:35 dell6510 genunix: [ID 936769 kern.info] sd41 is
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,0
May 21 10:53:35 dell6510 genunix: [ID 408114 kern.info]
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,0 (sd41) online
May 21 10:53:35 dell6510 scsi: [ID 583861 kern.info] sd53 at scsa2usb26:
target 0 lun 1
May 21 10:53:35 dell6510 genunix: [ID 936769 kern.info] sd53 is
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,1
May 21 10:53:35 dell6510 genunix: [ID 408114 kern.info]
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,1 (sd53) online
May 21 10:55:02 dell6510 xhci: [ID 902155 kern.info] NOTICE: xhci2: xhci
stop endpoint command (4)/slot (9) in wrong state: 19
May 21 10:55:02 dell6510 xhci: [ID 617155 kern.info] NOTICE: xhci2:
endpoint is in state 3
May 21 10:56:03 dell6510 xhci: [ID 902155 kern.info] NOTICE: xhci2: xhci
stop endpoint command (4)/slot (9) in wrong state: 19
May 21 10:56:03 dell6510 xhci: [ID 617155 kern.info] NOTICE: xhci2:
endpoint is in state 3
May 21 10:57:04 dell6510 xhci: [ID 902155 kern.info] NOTICE: xhci2: xhci
stop endpoint command (4)/slot (9) in wrong state: 19
May 21 10:57:04 dell6510 xhci: [ID 617155 kern.info] NOTICE: xhci2:
endpoint is in state 3
May 21 10:58:21 dell6510 ahci: [ID 777486 kern.warning] WARNING: ahci4:
ahci port 3 has interface fatal error
May 21 10:58:21 dell6510 ahci: [ID 687168 kern.warning] WARNING: ahci4:
ahci port 3 is trying to do error recovery
May 21 10:58:21 dell6510 ahci: [ID 551337 kern.warning] WARNING:
ahci4:         Transient Data Integrity Error (T)
May 21 10:58:21 dell6510        Handshake Error (H)
May 21 10:58:21 dell6510 ahci: [ID 657156 kern.warning] WARNING: ahci4:
error recovery for port 3 succeed

The diskinfo finally completes:
# diskinfo
Password:
TYPE    DISK                    VID      PID              SIZE         
RMV SSD
SCSI    c6t0d0                  Generic- USB3.0 CRW   -SD   29.89 GiB  
yes no
SATA    c27t1d0                 Samsung  SSD 850 EVO 250GB  232.89 GiB  
no  yes
NVME    c8t002538B471B9EFD6d0   PM961    NVMe SAMSUNG 1024GB  953.87
GiB   no  yes
NVME    c9t002538B471B9EFD3d0   PM961    NVMe SAMSUNG 1024GB  953.87
GiB   no  yes

i get the same behaviour with a different card reader:

May 21 11:01:04 dell6510 usba: [ID 912658 kern.info] USB 2.10 device
(usb781,cfca) operating at hi speed (USB 2.x) on USB 2.0 external hub:
storage at 2, scsa2usb26 at bus address 8
May 21 11:01:04 dell6510 usba: [ID 349649 kern.info] SANDISK SDDR-409
B00200200100
May 21 11:01:04 dell6510 genunix: [ID 936769 kern.info] scsa2usb26 is
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2
May 21 11:01:04 dell6510 genunix: [ID 408114 kern.info]
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2 (scsa2usb26) online
May 21 11:01:04 dell6510 scsi: [ID 583861 kern.info] sd41 at scsa2usb26:
target 0 lun 0
May 21 11:01:04 dell6510 genunix: [ID 936769 kern.info] sd41 is
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,0
May 21 11:01:04 dell6510 genunix: [ID 408114 kern.info]
/pci at 0,0/pci1028,7b1 at 14/hub at 5/storage at 2/disk at 0,0 (sd41) online
May 21 11:02:07 dell6510 xhci: [ID 902155 kern.info] NOTICE: xhci2: xhci
stop endpoint command (2)/slot (10) in wrong state: 19
May 21 11:02:07 dell6510 xhci: [ID 617155 kern.info] NOTICE: xhci2:
endpoint is in state 3
May 21 11:02:41 dell6510 ahci: [ID 777486 kern.warning] WARNING: ahci4:
ahci port 3 has interface fatal error
May 21 11:02:41 dell6510 ahci: [ID 687168 kern.warning] WARNING: ahci4:
ahci port 3 is trying to do error recovery
May 21 11:02:41 dell6510 ahci: [ID 551337 kern.warning] WARNING:
ahci4:         Transient Data Integrity Error (T)
May 21 11:02:41 dell6510        Handshake Error (H)
May 21 11:02:41 dell6510 ahci: [ID 657156 kern.warning] WARNING: ahci4:
error recovery for port 3 succeed

There is no such behaviour on a different OI host (old fuji server), i
just checked USB2 and 3, did a pkg update, and checked again, everything
is fine..

So there is something different and wrong on my Laptop.

:-/