[OpenIndiana-discuss] USB drives in VirtualBox 7.1.10

[russell]

Hi,

Used google on some of the error messages which appeared to indicate 
that the vbox usb driver was not loaded, so checking with modinfo

# modinfo | grep vbox 205 fffffffff5f1c5d0 cc8 310 1 vboxnet (VirtualBox 
NetAdp 7.1.10r169112) 207 fffffffff5f77000 61508 308 1 vboxdrv 
(VirtualBox HostDrv 7.1.10r16911) 221 fffffffff6029000 4f98 37 1 
vboxusbmon (VirtualBox USBMon 7.1.10r169112 257 fffffffff6298000 70a0 
305 1 vboxusb (VirtualBox USB 7.1.10r169112) 258 fffffffff629f000 7ba8 
309 1 vboxflt (VirtualBox NetDrv 7.1.10r169112) 258 fffffffff629f000 
7ba8 - 1 vboxflt (VirtualBox NetMod 7.1.10r169112) 280 fffffffff6460000 
4a08 314 1 vboxms (VBoxMouseIntegr 7.1.10r169112) 281 fffffffff6464000 
38d30 313 1 vboxguest (VirtualBox GstDrv 7.1.10r169112)

Not sure what else to check

Kind Regards

Russell

On 2025-07-18 16:24, russell wrote:
>
> Good Afternoon
>
> I am trying to get a USB drive to appear inside a VirtualBox VM, when 
> I plug the USb drive into either a USB 3.0 or 2.0 port the following 
> happens.
>
> 1. "Cannot mount volume" dialogue box appears    Error 
> org.freedesktop.DBus.Error.AccessDenied
>
> 2. The USB drive opens with a File System Window
>
> 3. Press OK on the Cannot mount Volume dialogue window. 4. Within 
> VirtualBox window, select Devices -> USB -> USB Drive
>
> 5. The USB Drive File System Window disappears
>
> 6. Checking the VirtualBox logs
>
> 00:32:05.813938 AHCI#0: Port 0 reset
>
> 00:32:05.814998 VD#0: Cancelling all active requests
>
> 00:34:35.684038 VUSB: Detached '0000000006810930[proxy 0781:55a5]' 
> from port 2 on RootHub#1
>
> 00:40:13.236538 Display::i_handleDisplayResize: uScreenId=0 
> pvVRAM=00007fff8be00000 w=1849 h=1205 bpp=32 cbLine=0x1CE4 flags=0xD 
> origin=0,0
>
> 00:40:13.236698 GUI: UIFrameBufferPrivate::performResize: 
> Size=1849x1205, Using fallback buffer since no source bitmap is provided
>
> 00:41:14.038234 Display::i_handleDisplayResize: uScreenId=0 
> pvVRAM=00007fff8be00000 w=1849 h=1205 bpp=32 cbLine=0x1CE4 flags=0x1 
> origin=0,0
>
> 00:42:52.643420 VUSB: Attached '000000000252aea0[proxy 0781:55a5]' to 
> port 2 on RootHub#1 (HighSpeed) 00:42:53.078241 USBProxy: Command 
> 0xc0185699 failed. Req.rc=VERR_GENERAL_FAILURE
>
> 00:42:53.078266 USBProxy: usbProxySolarisReset: Failed! rc=-1
>
> 00:42:53.111386 USBProxy: Command 0xc0185694 failed. 
> Req.rc=VERR_PIPE_IO_ERROR
>
> 00:42:53.111406 USBProxy: usbProxySolarisUrbQueue: Failed! 
> pProxyDev=000000000252aea0[proxy 0781:55a5] pUrb=000000000323fa00 
> EndPt=0x0 bEndpoint=0x0 enmType=4 enmDir=1 cbData=72 rc=VERR_PIPE_IO_ERROR
>
> 00:42:53.860247 USBProxy: Command 0xc0185699 failed. 
> Req.rc=VERR_GENERAL_FAILURE
>
> 00:42:53.860276 USBProxy: usbProxySolarisReset: Failed! rc=-1
>
> 00:42:53.960753 USBProxy: Command 0xc0185694 failed. 
> Req.rc=VERR_PIPE_IO_ERROR
>
> 00:42:53.960774 USBProxy: usbProxySolarisUrbQueue: Failed! 
> pProxyDev=000000000252aea0[proxy 0781:55a5] pUrb=000000000323fa00 
> EndPt=0x0 bEndpoint=0x0 enmType=4 enmDir=1 cbData=72 rc=VERR_PIPE_IO_ERROR
>
> 00:42:54.795254 USBProxy: Command 0xc0185699 failed. 
> Req.rc=VERR_GENERAL_FAILURE
>
> 00:42:54.795284 USBProxy: usbProxySolarisReset: Failed! rc=-1
>
> 00:42:54.895985 USBProxy: Command 0xc0185694 failed. 
> Req.rc=VERR_PIPE_IO_ERROR
>
> 00:42:54.896002 USBProxy: usbProxySolarisUrbQueue: Failed! 
> pProxyDev=000000000252aea0[proxy 0781:55a5] pUrb=000000000323fa00 
> EndPt=0x0 bEndpoint=0x0 enmType=4 enmDir=1 cbData=72 rc=VERR_PIPE_IO_ERROR
>
> 00:42:55.652255 USBProxy: Command 0xc0185699 failed. 
> Req.rc=VERR_GENERAL_FAILURE
>
> 00:42:55.652280 USBProxy: usbProxySolarisReset: Failed! rc=-1
>
> 00:42:55.752786 USBProxy: Command 0xc0185694 failed. 
> Req.rc=VERR_PIPE_IO_ERROR
>
> 00:42:55.752803 USBProxy: usbProxySolarisUrbQueue: Failed! 
> pProxyDev=000000000252aea0[proxy 0781:55a5] pUrb=000000000323fa00 
> EndPt=0x0 bEndpoint=0x0 enmType=4 enmDir=1 cbData=72 rc=VERR_PIPE_IO_ERROR
>
> 7. Within the VirtualBox instance (this instance Windows 11), it 
> reports an Unknown USB Device (Invalid Device Descriptor)
>
> Windows has stopped this device because it has reported problems. 
> (Code 43) The USB device returned an invalid USB device descriptor.
>
> 8. Deselecting the USB Drive from the VirtualBox VM instance causes 
> the USB Drive to appear in a new File System Window.
>
> 9. VirtualBox is reporting
>
> Failed to attach the USB device SanDisk Cruzer Snap [0100] to the 
> virtual machine win11-ts5.
>
> USB device 'SanDisk Cruzer Snap' with UUID 
> {2d6578d3-5af2-4522-917f-a8ee88a798bc} is busy with a previous 
> request. Please try again later.
>
> Result Code:
>
> 	
>
> NS_ERROR_INVALID_ARG (0x80070057)
>
> Component:
>
> 	
>
> HostUSBDeviceWrap
>
> Interface:
>
> 	
>
> IHostUSBDevice {c19073dd-cc7b-431b-98b2-951fda8eab89}
>
> Callee:
>
> 	
>
> IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8}
>
> I do have the correct extension pack installed, I have also ensured 
> that vboxuser group membership is configured.
>
> Any suggestions on how to get this to work.
>
> Kind Regards
>
> Russell
>