[OpenIndiana-discuss] debugging mouse freeze/lockup

[Jerry Kemp]

Hello Tim,

thanks for posting this.  It doesn't happen frequently, but I have been fighting 
the same issue.  Gigabyte MB, Sun/Oracle type 7 USB keyboard and Sun Crossbow 
USB 3 button mouse.  Nvidia GeForce GTX 460 SE frame buffer.

NVIDIA driver version 295.75.

I will look specifically for your Xorg log error next time this happens to my 
desktop.

Jerry


On 08/ 2/17 05:09 PM, Tim Mooney wrote:
>
> All-
>
> I'm looking for information on how to debug an issue where periodically
> the mouse pointer will freeze and become unresponsive.  The rest of the
> system appears fine and I can still use keyboard shortcuts to switch
> workspaces, close windows, and get to the point where I can reboot the
> system.
>
> I'm running hipster, last updated about 3 weeks ago, but this problem
> has been happening for a couple years, going all the way back to oi151a9.
>
> Hardware is a Dell Precision T3600 desktop, Nvidia GPU.  I've tried a
> couple of different mice -- both Dell USB mice, but much different models.
> The current mouse is a low-end Dell USB with 2 buttons + the middle
> scroll-wheel that also acts as a button.
>
> When the problem happened earlier today, after rebooting I found
> this in Xorg.0.log.old:
>
> [1140791.839] mouse: Device no longer present - removing.
> [1140791.855] (WW) mouse: cannot pop module 'usbms' off mouse device: No such
> device
> [1140791.855] (WW) mouse: cannot pop module 'usbms' off mouse device: No such
> device
> [1140791.855] (II) UnloadModule: "mouse"
>
> This is what that same Xorg.0.log.old had to say when the mouse was
> originally detected & configured at the previous boot-up:
>
> [    66.479] (II) NVIDIA(0): [DRI2] Setup complete
> [    66.479] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
> [    66.479] (--) RandR disabled
> [    66.518] (II) Initializing extension GLX
> [    66.518] (II) Indirect GLX disabled.(II) config/hal: Adding input device mouse
> [    67.267] (II) LoadModule: "mouse"
> [    67.267] (II) Loading /usr/lib/xorg/modules/input/amd64/mouse_drv.so
> [    67.285] (II) Module mouse: vendor="X.Org Foundation"
> [    67.285]    compiled for 1.18.4, module version = 1.9.2
> [    67.285]    Module class: X.Org XInput Driver
> [    67.285]    ABI class: X.Org XInput driver, version 22.1
> [    67.285] (II) Using input driver 'mouse' for 'mouse'
> [    67.285] (**) mouse: always reports core events
> [    67.285] (**) Option "Protocol" "VUID"
> [    67.285] (**) Option "Device" "/dev/usb/hid0"
> [    67.285] (**) Option "StreamsModule" "usbms"
> [    67.286] (**) mouse: Protocol: "VUID"
> [    67.286] (**) mouse: always reports core events
> [    67.286] (==) mouse: Emulate3Buttons, Emulate3Timeout: 50
> [    67.286] (**) mouse: ZAxisMapping: buttons 4 and 5
> [    67.286] (**) mouse: Buttons: 9
> [    67.286] (**) Option "config_info"
> "hal:/org/freedesktop/Hal/devices/pci_0_0/pci1028_497_1d/hub_1/mouse_5_if0_10_logicaldev_input"
>
> [    67.286] (II) XINPUT: Adding extended input device "mouse" (type: MOUSE, id 6)
> [    67.286] (**) mouse: (accel) keeping acceleration scheme 1
> [    67.286] (**) mouse: (accel) acceleration profile 0
> [    67.286] (**) mouse: (accel) acceleration factor: 2.000
> [    67.286] (**) mouse: (accel) acceleration threshold: 4
> [    67.291] (II) config/hal: Adding input device mouse
> [    67.291] (II) Using input driver 'mouse' for 'mouse'
> [    67.291] (**) mouse: always reports core events
> [    67.292] (**) Option "Protocol" "VUID"
> [    67.292] (**) Option "Device" "/dev/usb/hid2"
> [    67.292] (**) Option "StreamsModule" "usbms"
> [    67.292] (**) mouse: Protocol: "VUID"
> [    67.292] (**) mouse: always reports core events
> [    67.292] (==) mouse: Emulate3Buttons, Emulate3Timeout: 50
> [    67.292] (**) mouse: ZAxisMapping: buttons 4 and 5
> [    67.292] (**) mouse: Buttons: 9
> [    67.292] (**) Option "config_info"
> "hal:/org/freedesktop/Hal/devices/pci_0_0/pci1028_497_1a/hub_1/device_4/mouse_1_if1_12_logicaldev_input"
>
> [    67.292] (II) XINPUT: Adding extended input device "mouse" (type: MOUSE, id 7)
> [    67.292] (**) mouse: (accel) keeping acceleration scheme 1
> [    67.293] (**) mouse: (accel) acceleration profile 0
> [    67.293] (**) mouse: (accel) acceleration factor: 2.000
> [    67.293] (**) mouse: (accel) acceleration threshold: 4
>
>
> Log messages after that are for hotkey/kbd.
>
> Most of the hits I've found on the net have related to laptops and USB
> devices that are being powered down to save power, but this is a
> workstation that is always on power.
>
> Any suggestions for what I should do to debug the issue?
>
> Thanks,
>
> Tim